Arrange power and Ethernet cables so that they are not likely to be stepped on or have items placed on them. This section provides information on network interface configuration. There are three main types of interfaces on the device:
The unit must be powered off where blasting is in progress and explosive atmospheres are present or near medical life support equipment. This device must accept any interference received, including interference that may cause undesired operation.After which you will be redirected to the window shown below, where you will see list of available WiFi Access Points in the area. Choose one according to your liking and press the Join Network button next to it.
To make the DHCP Server section visible, set interface protocol to Static. DHCP Server: General Setup The name of the image file can provide some basic information about the firmware. Names for RUT240 firmware image files are structured as so:Note: Firmware version RUT2_R_00.07.04.4 released on 2023.06.26 was removed due to an issue on certain modems with failing initial mobile connection after upgrading from RUT2_R_00.07.02.5 or lower. Any external antenna gain must meet RF exposure and maximum radiated output power limits of the applicable rule section. However, you may want to add a new user at first. This can be done from the Add New User section below:
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
Joined in 2023 
82 
63
Joined in 2023 
82 
63 
New Comment