FireAngel Optical Smoke Alarm with 10 Year Sealed For Life Battery, FA6620-R (ST-622 / ST-620 replacement, new gen) , White

Product Information

It’s important to remember that the sensors in all smoke alarms deteriorate after time, at FireAngel we recommend that smoke alarms are replaced every 10 years. Where your alarm is installed can trigger nuisance alarms if not correctly placed, for example too close to doors or windows. The Accessible Control Unit does not require an internet connection to work, but instead communicates with your Pro Connected Smoke, Heat and CO alarms via a secure radio frequency.

FireAngel 10 Year Battery Smoke Alarm FA6620-R | Toolstation

Mains powered smoke alarms require a hardwired connection into your home’s electricity supply and therefore we recommend that a professional installs these alarms.I bought two FireAngel smokes alarms 5 years ago as they were 'Which' best buys and one has become faulty. They are supposed to last for 10 years. I did everything that I could to remedy the issue but it kept going off. No – the FireAngel SCB10 Combination Alarm cannot be interlinked with any other alarm. See our Pro Connected alarm range which allows you to build a network of smoke, heat and carbon monoxide alarms across the whole home. When a Carbon Monoxide alarm is triggered, it will emit an alarm sound consisting of 4 loud beeps and a break repeated until the sensor is clear of Carbon Monoxide gas.

FireAngel Reviews | Read Customer Service Reviews of FireAngel Reviews | Read Customer Service Reviews of

With our sleep easy function, you can silence low battery chirps for 8 hours, up to 10 times. This feature not only allows you to enjoy a silent night’s sleep, but gives you vital time to take action and replace your batteries.If your alarm is functioning correctly, when you press the test button you will hear a cycle of 3 loud beeps and a break then another 3 beeps. This signals that the unit is working correctly. The FireAngel Pro Connected Gateway must remain connected to your broadband router via the provided Ethernet cable as well as to power. This is so that it can continue to communicate any events to FireAngel HQ and then on to your FireAngel app. If the Ethernet or power cable is disconnected, the alarms will continue to alert those in the household, but no events will be sent to your app. However, your Gateway requires power to function and so without this you will not receive notifications to your phone.